Call Today

 

 

Were you hunting for help and advice about How to Troubleshoot and Repair an Electric Water Heater?

Several modern-day residences use an electric water heater for their heating system, due to its ease and also simplicity of use. Nevertheless, just like any other electrical devices, troubles may occur with its usage, all of a sudden. It can be actually discouraging to get up to a cold shower as opposed to a warm one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, water heater troubles can be rather nerve-racking. The good news is, we have actually made a list of feasible services to your hot water heater concerns. There are a variety of variables that might trigger much of these issues, it could be a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you shut off the primary power supply for safety and security. Whatever the problem is, getting it fixed should not position too much of an issue if you follow these actions:

 

Inspect Your Power Supply:

As basic as this might seem, it is really required. Without adequate power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power problem. Inspect if the fuse is blown out or the breaker tripped. If the breaker is the issue, just turn it on and off again. Change any damaged or worn-out fuse. Check the home appliance with power after these adjustments to see if it's now functioning.

 

Check the Burner in the Water Heater:

If it's not a power issue, after that try looking into your heating element if it is still functioning. Test each of your burner to be sure the problem isn't with any one of them. If any of them is malfunctioning, change that part and afterwards check whether the hot water is back on.

 

Examine Your Thermostat:

If your water heater still isn't working or the water appearing isn't hot enough, you might need to inspect the temperature level settings on your upper thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open the gain access to panel and also press the red button for temperature reset over the thermostat. This need to help heat up the water. Transform the circuit breaker back on as well as examine if the trouble has been solved.

 

Call A Specialist:

If after changing all faulty parts as well as resetting your temperature level, the hot water heater still isn't functioning, you may require to speak to an expert plumber for a professional viewpoint. The trouble with your heater could be that the hot and cold faucets have been changed or it might be undersized for the quantity of hot water required in your house. Whatever the case may be, an expert plumber would certainly help resolve the issue.

 

Verdict

Hot water heater problems are not always significant. Most of them are due to minor concerns like a blown fuse or damaged heating element. Replacing the malfunctioning components should do the trick. Nevertheless, if you are still incapable to address the problem, give a call to your closest plumber to come to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Do you enjoy reading about Hot Water Heater Repair? Leave a short review directly below. We will be interested to see your opinion about this post. We are looking forward that you come back again before long. Feel free to set aside a second to share this entry if you liked it. Thank you so much for your time spent reading it.

Click For More Info